Kayan aiki harsashi 12 zamo. Danna akai-akai kayan aiki

Smooth-huda farauta makami furuci masoya na da irin wannan abin shagala kawai a duniya. A wannan labarin, za mu bincika daki-daki, mafi akai-akai kayan aiki 12 zamo dace da shi. Saboda haka, idan kana da daya lb.av. gubar (453.59 g), shi za a iya raba cikin goma sha biyu daidai guda. Daga gare su, to jefa guda yawan m nauyi da kuma diameters na zagaye harsasai. Eureka! Za mu juya 12 zamo harsasai! Lura cewa ciki diamita na kara tashar gun irin wannan format yayi daidai da sigogi na gubar dutsen ado.

Note: maras diamita na gun ganga 12 ma'auni ne 18,5 mm. Amma shi ne bayyananne cewa ba girma na tashoshi daga ce ma daban-daban. Wadannan bambance-bambance ne saboda bambanci a cikin nauyi na laba daya a grams da ke faruwa a daban-daban jihohi. Alal misali, Rasha laba yayi dace da 409,512 g da Austria - 560,01 g

Wasu makamai masana'antun dabi'u haifa da diameters Range daga 18,2 zuwa 18.9 mm. Tula makamai factory samar da makamai na zamo 12 tare da diamita na 18,5 mm tashar. A Izhevsk ƙwarai inji aiki factory wanda ƙera don shotguns ganga da ciki diamita 18.4 mm (har zuwa 1990 Goda diamita ganga samar a cikin wannan samarwa ya daidaita 18,2 mm).

Gun kamfanoni a Jamus da kuma Italiya samar da 12-ma'auni shotguns da ganga, da adadin abin da yake daidai ga diamita daga 18.6 mm, US masana'antun - 18.9 mm, UK - 18.7 mm.

Kamar yadda zamu iya gani, 12 zamo harsasai kaya - wani sosai da dabara aiki, saboda ciki diameters na kara tashar makamai bambanta dangane da model na shafi. Ga kayayyakin sanya daga karfe, da bango ne sosai thinner fiye da na wannan takarda ko roba zabin. Wannan shi ne dalilin da ya sa gangar jikin tashoshi yi a karkashin Papkova hannun riga da karami diamita a kwatanta da tashoshi halitta da karfe. A general, mafi versions na farauta bindigogi tsara don amfani da takarda liners.

12 zamo tarin harsasai

Domin daban-daban tsawo na hannayen riga sanya wadannan zamo 12 harsashi:

• warhead da 65 mm tsawon na hannun riga.
• warhead tsara don wani hannun riga na 70 mm;
• warhead Magnum (hannun riga tsawon 76 mm).
• harsashi Super Magnum (hannun riga tsawon 89 mm).

12 zamo harsashi suna classified bisa ga irin cajin:

• grapeshot.
• shotgun.
• harsashi.

Warheads qaddara diamita ma bambanta bisa ga aikace-aikace. rarrabe:

• farauta.
• rauni.
• wasanni.
• sigina warheads.

MEC 600 inji

Bari mu dubi tura kayan aiki MEC 600 Jr. harsashi - mafi m tsakiyar aji-na'urar.

Wannan samfurin da aka halitta ga wadanda suke so, to dole a low-cost na'ura, ba ku yi jihãdi ga cikakken aiki da kai na tsari, amma a lokaci guda o ƙarin don samun cikakken sakamakon binciken. Ga misali ba a kunna auto Feeder iyakoki, amma shi ba kome. Yana za'a iya sayansu daban da kuma shigar a kan latsa. Ka lura da cewa wannan shi ne mafi arha a cikin dukan inji kayayyakin aiki, na wannan yanayi.

Kayan aiki ammonium a cikin gida gaba ka koma ga "zama don m." Saboda haka, mafi sana'a fi son wannan na'ura - kafuwar kayan yau da kullum a cikin model number na MEC. Mon 600, kazalika da duk sauran articles ake magana a kai kamfanin, Ya halitta, daga karfe. Yana sanye take da iko tsarin, dogon aiki liba tare da wani dadi riko, high-sa daidaitacce nozzles.

A gaskiya, latsa MES 600 da aka tsara don haka da cewa kowane aiki ne da za'ayi a kan shi mallaka, da kansa da sauransu. An talakawa mai amfani to ba, misali, 12 zamo harsashi, wannan na'urar ne quite zama dole, domin mafi girma yadda ya dace da na'urar Mon 600 ne kamar 250 warheads awa. Bugu da ƙari kuma, Masters iya ba su hannun riga diamita 76 da kuma 70 mm. The inji sanye take da wani tsawo daidaitacce gudanar zobe yi nufi ga crimping karfe tushe kora harsashi.

A gaban mai santsi mazugi sauki mirgina za a iya za'ayi. Machine ga harsashi zamo kayan aiki, ta kawar da kora share fage da kuma presses da sabbin matakai da harbi da kuma gunpowder, hannun riga rufe shida ko takwas haskoki.

Machine Lee Load All 2

Wannan na'urar ta sallami zuwa warheads 12 da kuma 20 ma'auni. Suna da za'ayi a cikin gida na ammonium kayan aiki zuwa shotguns. Wannan na'urar ya yi aikin da wadannan ayyuka:

• ne extruded da kora presses da iyakoki.
• calibrates da karfe hannun riga shugaban.
• Reload harsashi a cikin ɓatar daga dũkiya, kuma wani sabon hannun riga.
• pyzhuet harsashi.
• presses da hannun riga da wani alama.
• 60-100 warheads iya cajin awa.

The na'urar yana dispensers foda kasarun adadi da wani sa na matosai (24 guda).

Twists a-tebur

Yanzu la'akari da juya jirgin, ba harsashi 12 zamo. Yana da cikakken harbi Wad, mirgina free baki Dultsev roba ko takarda hannayen riga.

The na'urar ne a haɗe zuwa sashi tebur. Bugu da ari tsare warhead aka sanya tsakanin mutu da wanki (dulcitol da matrix, kuma zuwa ga wanki kai). Sa'an nan, pursing Chuck mafarauci rike spins hannun riga baki. Abin lura shi ne cewa a daidai wannan lokaci hannunsa na hagu ya presses da warhead m hannu. Kuma da mafarauci dole ba zama da yawa matsa lamba a kan shi, in ba haka ba shi yiwuwa ganimar da gefen hannun riga.

Sha'awa, da karkatarwa kwamitin da mafi alhẽri yi fiye da manual, kamar yadda su ne mafi dadi don amfani. Wadannan na'urori ana ci da gumi baki Dultsev smoother da firmer.

Kayan aiki warheads a gida

Kayan aiki 12 zamo harsashi a cikin wani gida yanayi ba za a iya kira super rikitarwa abu, sai dai in, ba shakka, to bi aminci dokoki. Eh, bisa manufa, wani harsashi ne mai sauki ba da gidan: Yana da muhimmanci a yi m, kuma m. A tsari kubutar da kudi da kuma taimaka sana'a nazarin ballistics ayyuka yayin daga shotgun harbi. Ya kamata a lura da cewa maharbin samun karin yardar lokacin nemi daji wasan da warheads na da kansa samar.

Wadanda suke da sha'awar in m kayan aiki 12 zamo harsasai, wanda ya so mu koyi wannan sabon abu craft buƙata sayi (ko dai kai sanya) da wadannan na'urorin:

• kaya masu nauyi daga 0.01 zuwa 20 g, da kuma Sikeli yin la'akari da foda da kuma harbi bawo.
• mazugi for straightening gefuna ciyar harsashi, a na'urar for kwatangwalo irin warheads kayan aiki ko "Barkalay".
• auna ga batches na foda da kuma harbi.
• mazurari ga ciko casings da foda sulusi da murabba'i, wads ga yankan.
• karkatarwa, zavaltsovyvayuschaya hannun riga.
• k tsare warheads ko ya ciyar harsashi dole ne a ma'auni zobe.
• bukatar for liners tsaya: kowane hamsin grand.

Mutane da yawa daga cikin na'urorin da aka jera a sama na iya zama sayan a Stores miƙa kayayyakin farauta, da kuma wasu - yi da hannuwansu.

A sayarwa za ka iya samun ma'aunai weighting ga baki foda da kuma harbi. Amma da yawa dayansu ga sashi na gunpowder "Falcon" (smokeless) ya sanya da dama yardsticks da hannu. Sun sanya su daga roba kwalban iyakoki: matsanancin gefuna an yanke, kuma a haɗe zuwa makama via da bedplate.

Sa'an nan otkalibrovyvayut ma'aunai karkashin samfurin "Falcon" gunpowder. Don yin wannan, kai ya so nauyi da kuma zuba ta hanyar mazurari cikin mudu uku. Next, tsara a layi abu da kuma lura da matakin. Bayan wannan yanke baki ma'aunai, yin at 1 mm sama da alama, kamar yadda scooping foda daga cikin kofin, da tabbaci sa ba shi yiwuwa, don haka shi ne cika kawai ta hanyar da mazurari.

Mataki-mataki jagora

Saboda haka, mu ci gaba da karatu da kara yadda za a ba harsashi 12 zamo. Merck rajistan shiga yin la'akari diba foda. Lokacin ji a hankali yayi daidai da akayi cajin nauyi, wannan nauyi da aka sanya a cikin makama.

Ba zato ba tsammani, makwararin cika casings bonded takarda, roba ko sanya na wani ƙarfe na bakin ciki takardar. A mazugi, wanda daidaita Dultsev ciyar harsashi, ko machined daga m itace ko karfe.

A general, kayan aiki da buckshot harsashi 12 zamo kunshi wadannan matakai.

1. Hunter tsame da kora primers domin sake amfani harsashi.
2. Ya sikanin, dadin jikina da kuma shirya shafi ga kayan aiki.
3. Bugu da ari, guga man zuwa cikin capsules.
4. Hunter auna da kuma metered zargin gunpowder kuma barci a cikin hannayen riga.
5. Sa'an nan, ya cika har da wads a cikin foda.
6. Auna ko metered harbi bawo. Barci a cikin hannayen riga.
7. Sa'an nan, ya cika har da shotgun wads.
8. Wadannan su ne nan yadda ya kamata a kulla.
9. Labeled harsashi.

harsashi lokuta

Muna fatan masu karatu za su yi farin ciki don nazarin kayan aiki 12 zamo: na'ura da kuma sauran abubuwa dole domin irin wannan mai tsanani tsari. Shin ka san cewa ya ciyar harsashi sana'a biya mai yawa da hankali? Menene kunshi? Idan hannun riga yana da wani a tsaye crack, ko hutu, shi yana qaryata. Idan wani mafarauci zai sami wannan samfurin tearing dulcitol ko ya raunana soket karkashin hula, mai gangara fasa kafa tare da babba baki na karfe bottoms, bai yi amfani da shi. Kuma dauke aure samfurin ciwon burnouts, delamination da kuma gida kumburi bango takarda.

Idan shafi tearing dulcitol, da kuma sauran illoli da ake samu, ana iya amfani da hur zargin. Amma kuma akwai bukatar a taqaitaccen da 7 mm.

Idan damp hannun riga, suna bushe a cikin tanda ko a cikin wani hanya. Wannan tsari zai rage diamita: da samfurin zai shigar da yardar kaina a cikin ɗakin makamai. A bushe foda harsashi iya zama quite lokaci mai tsawo kula da yãƙi Properties.

A kashe ko takarda tube kayan aiki ga dayansu conical pravilkoy daidaita dulcitol. Idan takarda samfurin da aka raunana da ƙarfi, za ka iya mayar da ita, soaking da samfurin narke paraffin ko da kakin zuma. A ainihi, kaya farauta harsashi na bukatar kungiyar na wurin aiki, da bayar da ikon yin dukan waɗannan ayyukan.

ciko tare da foda

Yarda da buckshot harsasai kayan aiki (12 zamo makamai, kazalika) ne mai matuƙar nishadi al'amarinsu. Muna ci gaba da fahimta wannan hadadden tsari da kuma la'akari da jerin ayyuka da ciko da foda a cikin harsashi. Yi nufin ba da hannun riga da aka shigar a cikin shimfiɗar jariri, a gefen hagu na maye. A kowane daga cikinsu ya matse cikin capsules. Yana da muhimmanci cewa kwantena shiga gida ba tare da hargitsi, m. Idan an sanya akwai yardar kaina, da hannun riga bukatar jefar.

Next shirye samfurin da aka sanya shi a cikin wani komai a tsayawar a gefen dama a wuraren aiki. Amma idan akwatin an bar wani yawan capsules, shi ne ya aiko don m ajiya. Sa'an nan barga balance tushe da kuma sa na kaya masu nauyi da kuma tara makamai ma'auni ne ga dosing foda, wani kofin. Da farko duba raw kayan saduwa da yin la'akari da misali. Abu diba kofin saboda haka aka cika da zamewar.

Bugu da ari batu na hannun riga ko in ba haka ba a kawar da wuce haddi foda. albarkatun kasa suka rage a cikin awo ne auna. Idan da nauyi yayi dace da zabi kaya, ta fara cika abu a cikin shafi. Da zarar mafarauci cika harsashi 10-12, ya ko da yaushe riqe da rajistan shiga yin la'akari gunpowder.

Yana da muhimmanci a tuna cewa foda an cika ta da monotonous ƙungiyoyi.

shawarwari

Kamar yadda ka gani, da farauta harsashi kayan aiki na bukatar babban hakuri da kuma daukan lokaci mai tsawo. Kuma idan kun yi shirye don ƙarin lengthy tsari, metered zargin gunpowder a cikin balance, kamar yadda, sãɓã wa jũnamai ko a 0.02 g rinjayar da sigogi na tarkace harbi. Af, domin warheads, wanda ake amfani da dogon nesa Shots ko musamman, foda yin la'akari dole ne.

Saboda haka, da sikeli sa zuwa hagu na kofin tare da foda, kusa da mafarauci. Na kofin zuba foda ta hanyar mazurari cikin hannun riga. Bugu da ari, cike da kofe kafa zuwa wani komai a tsayawar.

Ka tuna, ga bazara hunts ba bukatar ka yi amfani da wani iko da cajin da gunpowder, domin lalle ne su, a wannan lokaci za kawai worsen da ingancin harbe tarkace da kuma samar da wani karfi mai da. Amma irin wannan farauta zama wata azãba mai - ba'a shi ba su samu.

Domin bindigogi al'ada nauyi da a kan sãsanninku ganga harsashi suna ɗora Kwatancen da wadannan dokoki.

1. Ammonium yi nufi ga autoloading bindigogi ba karamin adadin foda ake bukata domin aiki da kai.
2. Idan zafin jiki ne m, foda zargin kara.
3. Kayan aiki harsashi 12 zamo harsashi ko garwa azurta wata karuwa da 0.5 g samfurin na baki da kuma foda 0.1 g foda "Falcon" for zamo makamai shigar sama da shawarar yanayi gwajin rabo. Ga wasu calibers da makamai da kara a gwargwado ga taro na babban cajin.

Idan kayan aiki 12 zamo harsashi harsashi da aka gudanar gaskiya, shi ne shawarar zargin samar da isasshen farko harbi gudu harsasai da kuma buckshot ga wani farauta.

foda wads

Da zarar duk da bawo cika da gunpowder, da dayansu shảfe dosypki wads. A hannun riga an saka alternately obtyuriruyuschy Wad sanya kwali game 2 mm m, kuma felted - osalenny sa'an nan neosalenny wads.

Bayan kammala, wasu sana'a sa na bakin ciki kwali Wad, inda gun yaƙi zama mafi sprawling. The abu ne cewa, shi Yanã shimfiɗa sau da yawa nakasawa sulusi da murabba'i.

Kwali Wad cikin hannun riga an saka à. Ya mayar navoynikom, kuma yana daukan wani kwance matsayi, sa'an nan kuma ƙara ƙarin foda. Ji wads ƙulli makamai zuwa shiga hannun riga, ba su alagammana shi dulcitol. Bayan nan, rotational motsi , suna sanya a cikin harsashi da kuma mayar da su navoynikom pyzhu kwali.

aminci

Abin da sauran surprises za mu iya gabatar da wani 12-ma'auni harsashi kaya? Lee Load All 2 da kuma sauran irin wannan na'urorin a aikin da ake bukata don cika da aminci dokoki. A lokacin da kayan aiki da aka ba a yarda a kusa da wani bude wuta, da hayaƙi, embed iyakoki bayan ciko da foda harsashi, guduma guduma bawo, ko da wani sashe daga aiki a kan m da datti surface.

Har ma da karami hatsi da yashi, ya faru da zama a karkashin kwantena, da latsa ne iya ƙone shi.

A general, a lokacin da tara makamai warheads bukatar zama da tsabta da kuma ma'ana. Kuma idan dukan dokokin, ko da novice mafarauci iya ba domin yamma har zuwa hamsin akai-akai.

Chucks "Magnum"

Shin, ba ka san cewa "Magnum" harsashi na 12 zamo kayan aiki dauke su sosai alhakin abu? Wadannan warheads kwanan nan tsiwirwirinsu babbar shahararsa cikin gida dayansu. Kuma a kan su West godiya.

Me suka wakilta? Simple harsashi hannun riga 70 mm size kasarun adadi dauke 32-36 g. More m warheads tare da manyan hannayen riga 76 da kuma 89 mm an riga classified a matsayin "Magnum" (harbe nauyi 40-52 g). A cikin kasuwar za ka iya samun warheads kerarre da samfurin masu girma dabam 12/70, ake magana a kai a cikin "Polumagnumom" yawan (salla sulusi da murabba'i in su - 38-42 g).

Saboda haka, mu yi nazarin "Magnum" harsashi na 12 zamo kayan aiki, kamar yadda bayani kamar yadda zai yiwu. Our kibiyoyi yawanci amfani a cikin wannan model warheads makamai 12/76 format. Bayan 12/89 format na bukatar takamaiman makamai da halitta mai iko sosai tasiri.

Handwritten kaya warheads "Magnum" 12/76 da 52-gram sulusi da murabba'i na bukatar gwani sana'a bayyananne yi duk fasaha tsari nuances. Lalle ne, haƙĩƙa bukatar duba cewa your gun da aka tsara don payloads wannan model yayi dace da 76-millimeter jam'iyya.

Ga kayan aiki zargin "Magnum" amfani da roba hannun riga (tsawon 76 mm) 12 ma'auni. Share fage ne dole a zabi wani high quality. Daga m powders daidai tabbatar da kansu a "Falcon" da kuma farauta "Sunar, 42 Magnum." Kamar yadda cajin ne don haka ya nuna alama kamata a yi amfani.

A foda ganga saka Wad tare da takamaiman sigogi damper. A sulusi da murabba'i dauka daga №4 zuwa №0000. harsashi seaming za'ayi ko dai mirgina hanya, ko wani "star."

Ya kamata a lura da cewa kayan aiki na "Magnum" makamai ne mai matukar alhakin aiki. Kuma idan ilmi bai isa ba, daga gida horo akai-akai wannan model ya kamata a yi watsi.

Amma su suna sayar a wani shagon da farauta kaya!