Hutse-tsutse-hunturu a kan tsinkaye da hannayensu. Cikon hunturu na hunturu-bait don perch

Fans of hunturu kama kifi ga perch ne sau da yawa amfani da koto na gida baits. Kuma ba haka ba ne game da ceto ko kaɗan. Samun kyawawan kwafi, amma har ma don cokali na kayanka - wannan ƙarin jin dadi ne.

Bait na hunturu don kama da hannayensu yana da sauki. Babu wani kayan aiki da ake bukata. Duk abin da ake buƙata shi ne tushe, kayan aiki mai sauki da sha'awar. Amma na farko, bari mu bayyana tare da amfani da cokali-koto a cikin catching perch, da kuma ainihin bukatun da aka gabatar don kansa sanya baits.

Abũbuwan amfãni na cokali-koto kafin wasu nau'o'in hunturu baits ga perch

An san cewa a cikin hunturu, ana iya kama perch a kan kumburi (jinin jini, kwari na kwalliya, danko), mormyshku na talakawa, bezmotlku da kumbun-cokali. Abubuwa na farko da baƙi na farko sunyi aiki sosai a mahimmanci a ƙananan matakan da suke da zurfin zurfi a lokacin da suke samun '' jirgin ruwa '' makaranta. Idan muna magana ne game da mummunan yanayi, wanda aka samo a zurfin fiye da 5 m - wannan haƙiƙa ne mai tsarke hunturu. Baubles a bass, musamman manyan size, shi ne kawai irreplaceable. A cikin zurfin ya fi kyau a bayyane, bazai ɗauke da halin yanzu ba, kuma wasa mai kyau na irin wannan koto zai iya haifar da mummunan hali zuwa hankalinsa ko da a lokacin lokutan aikinsa.

Abin da kaya ya kamata a yi amfani da shi a hunturu don perch

Babban aikin da ake yi na hunturu shine a jawo hankalin dan wasa ta hanyar wasan. Ba tare da shi ba, wani kaya yana kawai wani sashi na karfe. Domin wasa wasan, koto ya kamata ya dace da nauyin da ya dace. Don ƙananan perch, ana amfani da cokali-mai amfani da 2 zuwa 5 cm a tsawon, amma ana amfani da manyan batutattun hanyoyi masu yawa - daga 5 zuwa 9 cm.

Akayi catchability hunturu spinners for perch, duk da cewa an yi su ne daga kayan kamar bakin karfe, tagulla da kuma aluminum, wanda a kansu suna da launi na kifi, sau da yawa sosai da ainihin Paint. Wani adadi wanda yayi kama da kifaye, fin ko jinin jini zai iya cika cikakken hotunan kuma ya inganta tasirin koto.

Cikali-baits, dangane da manufar, ana iya ɗawainiya da guda, sau biyu ko sau uku. An zaɓi nau'inta da girmansa bisa girman girman koto.

Da farko, bari mu yi ƙoƙarin yin sauƙi mai tsin-tsami mai sauƙi-don kullun da hannayenmu. Hotuna na kyautar gida za a gabatar a kasa. Don kada ku ciyar kudi akan kayan aiki, ya fi kyau farawa da kwance a ƙarƙashin ƙafafunku.

Masu tsutsawa na hunturu suna iya kama da hannayensu daga giya

Kuna iya horar da kayan aikin giya akan gurasar giya, kofi ko abincin gwangwani. Za a iya amfani da ƙugiya daga takarda mai launin aluminum ko tin don yin kama kifi a kan "mai tanin ruwa" a kan shallows a cikin yanayi na ƙwayar zero. Daga kayan aikin da muke bukata almakashi ga karfe, awl da sandpaper. Har ila yau, nau'i biyu da murya da nau'in da ba a ba da 7 ba.

Yanke gilashi kuma daidaita shi a cikin takarda. Cire Paint daga waje tare da fata. Mun sanya alama na blanks 2 x 4 cm cikin girman. Yanke su. Sharp gefuna da zane-zane don zobba. Bugu da ƙari duk abin da muke niƙa, kawar da burrs.

Yanzu buba mai zuwa gaba-koto ya kamata a lankwasa tare da gefen tsaye. Don yin wannan, saka sakon a cikin takarda na yau da kullum, tare da taimakon kowane wuri mai laushi mai sauƙi, tare da ƙoƙari, sassauci, ba shi da siffar da ya dace. Bayan haka, mun gyara zobba da ƙugiya. Amfani da ƙusa goge ja da launuka, za a iya fentin shugaban spinners. Yanzu zaka iya gwada.

Wannan, ba shakka, ba shine mafi yawan tsutsawar hunturu ba, amma suna aiki, musamman ma a lokuta na babban aikin mai tasowa.

Pilker don sacewa daga tweezers

Ma'aikaci ne karamin ƙuƙwalwar ƙuƙwalwa don hunturu kamafi. A gida, an yi shi daga wani yanki na bakin karfe, azurfa, jan ƙarfe ko jan ƙarfe.

Za mu yi karamin ƙuƙwalwar ƙugiya don "mai jirgin ruwa" daga magoya baya, wanda ake nufi don bukatun cosmetology. Duk da muke bukata - ne da kanta hanzaki, ko kuma wajen, daya daga cikin "feet", hacksaw, rawar soja tare da wani bakin ciki rawar soja, fayil, sandpaper, biyu Tuddan zobe kuma sau uku ƙugiya.

Yi la'akari da rabi na tweezers a hanyar da kashi ɗaya bisa uku na tsawon kwanakin nan gaba ya kamata a kafa, da kashi biyu cikin uku - a kan tsabtaccen "farfajiya". Yanke sare kayan aiki, sassauki fayil kuma zagaye gefen gefen cututtuka. Bugu da ƙari a gefen gefen da muka haƙa ramuka domin gyarawa da zobe. Bayan wannan, muna da yashi yashi takarda. Gyara da zobba kuma haša ƙugiya daga gefen inda aka ajiye ɗakunan. A koto yana shirye.

Pilker daga rike da cokali

Za'a iya yin amfani da hannayensu, ko da daga kayan abinci na yau da kullum, ko kuma abincin da ke cikin shayi, mafi daidai, daga kwallun. Hanyar, bisa mahimmanci, iri ɗaya ne: muna auna aikin da ake buƙata, yanke shi, raye ramukan a ƙarƙashin zobba kuma nada shi. Kulle an haɗa shi daga gefen da ya fi kowa. Idan rike da cokali yana da irin nau'i a kan ɗayan, yana da kyau, bari ya tsaya. Idan ya cancanta, ana iya fentin wani gefen pellet a cikin launi da ake buƙata tare da taimakon ƙusa goge.

Ma'aikata da aka kwatanta sunyi aiki sosai yayin da suke kama su a zurfin zurfin ruwa.

Triangle da aka yi ta USB

Daga sabaccen mai sarrafa kayan lantarki na kebul na lantarki, yana yiwuwa a samar da kaya mai kyau guda uku, kamar kamfanonin "Akme" suka samar. Zai dauki wani ɓangaren wutar lantarki na ɓangaren ɓangaren ɓangaren triangular tare da hawan triangle tsawo na 1 cm kuma tsawon tsawon 4 cm. An yanke gefuna na cokali a wani kusurwa na 30-45 digiri don haka bayanin martabar yayi kama da trapezium. A gefen raguwa an zubar da su a ƙarƙashin sutura. Ruwan aluminin Aluminum-size na wannan girman zai sami nauyin kimanin 4.5-5 g, wanda ya sa ya dace da farauta "humpback" a zurfin fiye da 5 m.

Na gida "Castmaster" daga tube mai jan ƙarfe

Ba tare da matsaloli na musamman ba, zaka iya yin kwasfa na kwari-kwari da tsinkaye ta hannun hannuwanka daga tube mai jan ƙarfe. Idan duk abin da aka yi daidai, ba za suyi aiki da kyau fiye da "Castmaster" daga kamfanin guda ɗaya "Akme" ba.

Don wannan na gida muna buƙatar:

• Sashe na wani sashi na karfe mai zurfi 8-10 mm;
• Dakata tare da salo na drills;
• A hacksaw na baƙin ƙarfe;
• Ƙarfin ƙarfe, soldering acid, solder;
• Protractor;
• Fayil ɗin fayil;
• Lambar Emery;
• 2 ƙwallon ƙafa;
• Sau biyu (sau uku) ƙuƙƙƙin ƙarfin babu 7-8

Amfani da mai samfuri ya zana layin da ke dama a kusurwar digiri 17. Mun motsa wurin farawa 3-4 mm zuwa hagu kuma alama alama ta biyu a daidai wannan hanya, kawai a kusurwar digiri 23.

Yanzu, tare da hacksaw, yanke gefuna na bututu daga bangarorin biyu ta hanyar da za mu samu mai farfajiyar miƙa a cikin daya shugabanci. Bayan haka, muna zafi da baƙin ƙarfe, aiwatar da gefen ciki na tikitin tare da acid, cika shi da ƙurar ƙarewa. Barin raƙuman gefe 2-3 mm, raye ramukan a ƙarƙashin suturar murya, bayan haka zamu sassaƙa saman har sai sun zama cikakke. Bayan haka, mun kama zobba da ƙugiya.

Ayyukan da aka nuna sun nuna cewa hunturu hunturu a kan nau'i-nau'in nau'in "Castmaster" yana da tasiri sosai, koda kuwa yana da gida. Babu daidaituwa a kallo na farko don siffar ƙuƙwalwa ta haifar da wasa na musamman, kuma siffar da aka gani ta jiki mai launin halitta, ta janye duk wani mawaki mai kyau.

Abubuwan zurfi na gida suna "torpedo"

Bayan an yi, za mu yi ƙoƙari mu yi amfani da kayan hannu da ƙwaƙwalwar hunturu. Zane-zane na farko na koto an yi a takarda. Rubuta adadi a cikin nau'i mai ma'ana mai tsawon 30-40 mm. Girman "torpedo" a cikin sashi na sama shine 10 mm, a cikin ƙananan - 3 mm. Gaba, muna yin takarda daga takarda, zana zanen mu.

Yanzu muna buƙatar shirya kayan aiki da kayayyakin aiki. Za mu buƙaci:

• Sheet jan ƙarfe 0.5 mm lokacin farin ciki;
• Awl;
• Gilashin ga karfe;
• Ƙarfafa ƙarfe, acid da solder;
• Hammer;
• Mai rushewa da nauyin tasiri mai mahimmanci ko saitin zane-zane na karfe;
• Kyakkyawan roba;
• Wani jan karfe waya giciye-sashe 0.5-0.6 mm;
• Hanyar ƙwayar 4-6 (aure);
• Fayil;
• Sandpaper.

Mun canza yanayin zuwa takarda na jan karfe kuma yanke wasu nau'i biyu. Kowane ɗayan su dole ne a ba su takaddun siffofi a duk fadin. Don yin wannan, zamu sanya kayan aiki a kan karar roba, ta amfani da macijin ko karfe na karfe da ake buƙata da kuma guduma don ba da ido a kan hanyar sadarwa.

Sa'an nan kuma dole ne a bi da ciki na kowane nau'i na fata tare da acid kuma an rufe shi da wani ma'auni na solder. Na jan karfe waya wajibi ne don yin biyu kananan madaukai for attaching Tuddan zobba da solder su zuwa cikin daya daga cikin sidewalls.

Bayan haka, dole ne a hada da halves tare da haɗin linzamin a cikin hanyar da ruwa ba zai iya shiga ba. Bayan kammala aikin babban abu, an yi tsabtace kayan aiki tare da takarda da sanded tare da takarda sandan har sai ya kasance mai santsi da santsi.

Mun sanya raƙuman rawanin cikin ramuka. An ƙugiya ƙugiya daga gefen gefe na cokali-cusa.